Truck Maintenance is one of the crucial pieces of equipment in any facility. Inaccurate weight systems due to factors such as debris buildup underneath the weighbridge can cost you huge sums of money, primarily if the scale is used extensively. However, following a basic truck preventive maintenance schedule can significantly reduce the weighing error and downtime. The standard truck scale maintenance and cleaning include regular visual inspection by scale service providers and site staff.
However, if you are experiencing a lot of inaccuracy in your measurement, it’s time to look for a new weighing system. Looking for truck scales for sale from a vendor with an excellent reputation can help ensure you have a high-quality scale that requires little maintenance. Regular inspection of your scale helps to ensure that potential problems are spotted and corrected before they can hit a customer’s pocketbook. This article will explore the top three preventive maintenance tips for truck scales.
1. Regular Inspection
The most common causes for inaccurate readings are debris, ice, and Dust, which can make the weighing readings go off by many pounds. Conducting a primary and regular inspection on the weighing scales is crucial to avoid any errors. Note that the examinations should correspond to how often you use the truck scale. If you use the truck scale every day, you should check them daily. When inspecting, always pay close attention to the parts surrounding the truck scale to check if they rub or lean against it. You also need to check for any corrosion of compounds, such as bumpers and gap covers.
If your scales are above the ground, you need to kneel and look underneath for any debris or buildup of mud. You can remove the material with shovels, rakes, or water in a horse if available. Open the access cover for vehicle scales in a pit and verify that the sump pump drains water from the scale pit.
2. Balance and Calibrate the Scales
When heavy trucks pass on the scale frequently, the scales will be subjected to a lot of pressure and wear and tear. It means that even small or oversized debris can cause incorrect measurements. This is why you must constantly balance your scale after debris removal and cleaning. Once you have cleaned and balanced your scale, you can perform a calibration check of the scales. It helps ensure that your weighing results are done accurately. When doing calibration, there are various factors that you will need to consider, such as the acceptable error rate, the number of days the scale is used annually, and the number of weight measurements per day.
3. Schedule a Professional Inspection
You can conduct daily inspections for scale and basic scale maintenance. For a better review, consider hiring a professional to inspect thoroughly, clean the truck scale, and repair it as needed. When doing an inspection, always check the manufacturer’s guidance to ensure that you care for your scale as needed and avoid using tools that are not required.
Final Thoughts!
Taking care of your scare through preventive maintenance helps you avoid costly errors and downtimes. It’s critical to schedule daily cleaning to remove debris and dust, mainly if your scales are used frequently. Don’t forget to ensure that you balance your scales and do the required repairs before they worsen.